Kenwood NX-5200K3 Common Function Reference

3
Press the Menu ([ ]) or [ ] key.
The Function List for the selected category appears.
4
Select the function to be started from the Function List by pressing the [ ] or [ ] key.
5
Press the Menu ([ ]) or [ ] key.
The selected function functions.
Options for a function, such as “ON” and “OFF”, can be selected by
pressing the [G]
or [H] key and then can be determined by pressing the
Menu ([Q]) or [*] key.
Example: Low Transmit Power
Next
12 : 34
A
M
Individual
Group
Status
Back
Call 1
Next
12 : 34
A
M
Individual
Group
Status
Back
Call 2
12 : 34
A
M
Group 001
Group 002
Group 003
Back
Group 1
OK
12 : 34
A
M
Off
On
Low TX Power 1
Back
Note
0
The category does not appear in Menu Mode when only one category is configured. When the transceiver enters Menu
Mode, the functions registered in Menu Mode appear.
0
Refer to “KEY OPERATIONS FOR EACH MODE” for the operation of each key in Menu Mode.
Configuration using KPG-D1/ D1N
Configuring Menu Mode (
Transceiver Settings > Key Assignment > Menu)
3 BASIC OPERATIONS
3.4 Using Menu Mode
Common FUNC (K, F)/Ver 2.20 39
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English