278 8163A/B, 8164A/B, 8166A/B User’s Guide
10 Applications
Setting Power Meter Parameters
Figure 172 The Keysight 8163B Stability Parameter Setup Screen
6 Press [Menu] to access the Stability application menu screen.
7Move to <Pwr unit>, press Enter, move to <dBm>, <W>, or <dB>, and
press Enter. See What are the Power Units ? on page 101 for an
explanation of power units.
8Move to <λ>, press Enter, enter the wavelength value of your optical
source, and press Enter.
If you are using the Keysight 8163B Lightwave Multimeter, press
[Modules] to access the Stability Setup Screen. Not all parameters are
available from the Stability Setup Screen.
To Next Page
Loading...
