8163A/B, 8164A/B, 8166A/B User’s Guide 81
Additional Information 2
Edit the Domain Name
You can enter the domain name in a special dialog for text input.
Figure 43 Edit Domain Name
•
Select a character by moving the high light with the cursor keys, (or the
modify knob on an 8164B/LAN), then press the [Select] soft key.
•
Delete the last character using the [Delete] soft key.
•
The [OK] soft key is disabled until the value in the editor is valid.
•
If you try to enter a character which would create an invalid domain
name, the instrument beeps.
To Next Page
Loading...
Need help?
General
