118 Keysight B2980B User’s Guide, Edition 1
How to Perform Measurement
Resistance Measurement
Scroll +100 Moves the pointer to the maximum 100
points below.
Points Number of values set to the list
Max Maximum value
Min Minimum value
Load List Sweep Data dialog box
This dialog box provides the following GUI for loading a list sweep data from a file
stored on a USB flash drive.
Highlight the file to load by using the line cursor. And press OK to load the data
and close the dialog box. The line cursor can be moved by turning the rotary knob.
(data graph) Displays the shape of the list sweep data selected by the file list
Path Folder which stores the list sweep data file
(file list) List of the list sweep data file
Points Number of values set to the list sweep data
Max Maximum value in the list sweep data
Min Minimum value in the list sweep data
The list sweep data must contain the output values only in the following format.
• File extension txt: Values separated by a carriage return or a line feed, for
example 0=1=2=1 (where, carriage return is expressed by =)
• File extension csv: Values separated by a comma, for example 0,=1,=2,=1
• File extension prn: Values separated by a space, for example 0 1 2 1
Square Wave Output Setup
Voltage Source supports the square wave output.
Square wave output is set by the following parameters. They are shown in the
source function sub-panel on the Meter view. To display the sub-panel, press the
Show VS Func. assist key. To see the assist key, you may need to press the
More... 1 of 3 assist key and/or the More... 2 of 3 assist key.
VS Function ARB SQUARE
Start Square wave base voltage, in V
Peak Square wave peak voltage, in V
To Next Page
Loading...
Need help?
General
