Keysight B2980B Series User Manual

Keysight B2980B User’s Guide, Edition 1 117
How to Perform Measurement
Resistance Measurement
VS Function LIST
Start First value set to the list, in V
Stop Last value set to the list, in V
Points Number of values set to the list
To perform the list sweep output, a list sweep data is required. The data can be
defined or loaded by using the List Sweep dialog box or the Load List Sweep Data
dialog box opened by pressing one of the following assist keys displayed by
pressing the rotary knob on the Start, Stop, or Points field.
Edit Opens the List Sweep dialog box used to define the list.
Load Opens the Load List Sweep Data dialog box used to load the
list sweep data.
List Sweep dialog box
This dialog box provides the following GUI for defining the list sweep data. After
the list is completed, press OK to apply the data and close the dialog box.
(data graph) Displays the shape of the list sweep output
(data list) Lists the data index in the left cell and the output value in the
right cell.
When the pointer is in the MOVE status, turning the rotary knob
moves the pointer onto the left or right cell. And pressing the
knob changes the status to EDIT.
When the right cell is in the EDIT status, the output value can
be entered by using the rotary knob.
When the left cell is in the EDIT status, the following assist keys
are available for creating and scrolling the list.
Then turning the rotary knob scrolls the list and pressing the
knob changes the status to MOVE.
Append Adds a line below. The same output value is
entered into the right cell.
Insert Adds a line above. The same output value is
entered into the right cell.
Delete Deletes the line.
Scroll 100 Moves the pointer to the maximum 100
points above.

Keysight B2980B Series Specifications

General

Brand	Keysight
Model	B2980B Series
Category	Measuring Instruments
Language	English