Keysight B2980B Series - Page 263

Keysight B2980B User’s Guide, Edition 1 263
Function Details
Initial Settings
Table 5-14 Other Non-volatile Settings
Setup item Factory default setting
Remote display Enabled
Display color set 1
Beeper Enabled
Power-on program Not set
Line frequency 50 Hz
Power-on PLC detection Enabled
Voltmeter inner shield connection GUARD
Dual measure display Enabled
Temperature unit C (Celsius)
Temperature meter Enabled
Humidity meter Enabled
Temperature sensor Thermocouple
Voltage source output resistor Disabled
Voltage source realtime update (Immediate voltage
update by knob)
Disabled
Measured Value Format (Meter View) ENG (Engineering format)