Kollmorgen MMC Smart Drive

90 Kollmorgen - December 2011
MMC Smart Drive Hardware Manual - 230V 1/3 PHASE MMC SMART DRIVE
5.1.6.2 Feedback Port (F1/F2) to Motor Cables
Several cables are available that allow easy connection between the Feedback Port
(F1/F2) and various Kollmorgen motors. These cables are detailed in Table 5-18
through Table 5-29. For information on Non-Flex versus Hi-Flex cables, refer to
section 9.1 on page 235.
Table 5-18: F1/F2 Endat/BiSS to AKM/DDR Motor Cables
For Connection Diagram, see Table 5-19 on page 91
Length Non-Flex P/N Hi-Flex P/N
1 M (3.3 ft) M.1302.8605 M.1302.8613
3 M (9.8 ft) M.1302.8437 M.1302.8438
6 M (19.7 ft) M.1302.8606 M.1302.8614
9 M (29.5 ft) M.1302.8607 M.1302.8615
15 M (49.2 ft) M.1302.8608 M.1302.8616
30 M (98.4 ft) M.1302.8609 M.1302.8617