148 Kollmorgen - December 2011
MMC Smart Drive Hardware Manual - 460V 3 PHASE MMC SMART DRIVE NEXTGEN
6.1.5 Drive I/O Connectors (IO1 & IO2)
The two 10-pin pluggable screw-terminal connectors (labeled “IO1” and "IO2" on the
front of the Drive) provide connection between various devices and the Drive. These
connectors provide one Analog Input, one Analog Output, two Fast Inputs, a relay
output, six General Purpose Inputs, and two General Purpose Outputs (wiring
example shown in See Figure 6-4 on page 151).
• Pin descriptions are provided in Table 6-16
• Pin assignments are provided in Table 6-17
To Next Page
Loading...