Konica Minolta C652 - Page 114

bizhub C652/C552 5-54
5.4 Application
5
d Reference
To prohibit changing the overlay registration:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö
[Restrict Access to Job Settings] ö [Change Registered Overly].
Settings
Recall Overlay Image To print a registered overlay image on both the face and back side of the
original, select [Front/Back Side], select [Front Side] to print on the face, and
select [Back Side] to print on the back.
Select an overlay image.
• You cannot select an overlay image when no overlay has been regis-
tered.
Thumbnail View
Display Name
Press [Thumbnail View] to display the preview im-
age and name of the overlay, and press [Display
Name] to display the name of the overlay.
Detail Settings Density: Set the overlay density between 20% and
100%.
Color: Select the color of the overlay image.
Composition:
• Transparent
Prints the overlay image and the original so that
both are visible.
• Background Composition
(Original)
Prints the overlay image over the original.
•Back
Prints the original over the overlay image.
Image Details Check the "Name", "Registered Date", "Image
Size", "Original Direction" and "Color" of the over-
lay image.
To confirm the enlarged overlay image, press [Pre-
view].
Register Overlay Image New Enter the name of the overlay image to be regis-
tered.
Load the overlay image original on the original
glass and press the [Start] key to have the overlay
image registered.
Overwrite Select an overlay image to use for overwrite and
press [Overwrite].
Load the overlay image original on the original
glass and press the [Start] key to have the overlay
image overwritten.
Delete Select an overlay image to be deleted and press
[Delete].
Detail Settings Density:
Specify the density of an overlay to be registered
between 20% and 100%.
Color:
Select the color for the overlay image to be regis-
tered from [Auto Color], [Full Color] and [Black].
Pages Select to print the overlay image on all pages or only on the first page.
Original Size Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
Custom Size Enter the original size.
Photo Size Select the photo size.