Konica Minolta C652 - When IC Card Authentication + Password Authentication Is Enabled

bizhub C652/C552 11-17
11.1 Using authentication unit (IC card type)
11
When IC card authentication + password authentication is enabled
1 Place the IC card on the authentication unit, and enter the password.
2 Press [Login] or the [Access] key.
% You are authenticated, and then the basic settings screen appears.
NOTICE
The importing notification sound is triggered. To reset this sound, press [Login] or the [Access] key to
perform authentication, meanwhile this machine is running normally.
If an authentication failure frequently occurs, authentication data may not be registered properly. Retry
to register the target user.