Konica Minolta C652 - Blank Page Print Settings; Skip Job Operation Settings

bizhub C652/C552 7-22
7.1 System Settings
7
7.1.13 Blank Page Print Settings
Configure whether to print stamps or overlay on blank pages.
% Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print
Settings].
7.1.14 Skip Job Operation Settings
Configure whether to start processing for the next job when the current job stops due to running out of paper
in the paper tray. Selecting "Yes" provides no print queue time due to job stopping.
% Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Skip Job Operation
Settings].
Settings
Configure whether to print stamp/composition on blank pages.
Factory default
Blank Page Print Settings Do Not Print
Settings
Fax Configure whether to skip a job in the fax mode.
Other than Fax Configure whether to skip a job in a mode other than the fax mode.
Factory default
Skip Job Operation Set-
tings
Fax: Yes
Other than Fax: Yes