Konica Minolta C652 - Default Bypass Paper Type Setting

bizhub C652/C552 7-23
7.1 System Settings
7
7.1.15 Default Bypass Paper Type Setting
Configure the initial settings for the paper type to be used for the bypass tray. The initial setting for the paper
type is applied after the job finishes or the tray runs out of paper.
% Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Default Bypass
Paper Type Setting].
Settings
Configure whether to specify the initial setting for paper type for the bypass tray. When you specified this,
select a paper type.
Factory default
Default Bypass Paper Type
Setting
Yes
Paper Type: Plain Paper