bizhub C652/C552 6-4
6.1 System Settings
6
Auto Paper Select for Small
Original
Specify the paper size to be used for a case where the document placed
on the original glass is too small to be detected in Auto Paper mode.
Copy on Small Size Prints on 5-1/2 e 8-1/2 paper.
• If 5-1/2 e 8-1/2 paper is not loaded in the tray,
a message that instructs you to load 5-1/2 e
8-1/2 paper in the bypass tray appears.
Copy on Letter Prints on 8-1/2 e 11 paper.
Prohibit Copy Starts printing when a paper tray is selected man-
ually and the [Start] key is pressed.
Blank Page Print Settings Appears when user access is permitted under Administrator settings. For
details, refer to page 7-22.
Page Number Print Posi-
tion
Specify a page number print position when printing page numbers after
configuring 2-sided print or booklet settings. Select whether to print the
page numbers on a same position on all pages or on positions symmetric
with respect to the stapling position.
Select Keyboard Select the keyboard type displayed by default in the touch panel.
Factory default
Language Selection English
Measurement Unit Settings inch (Fraction)
Auto Tray Selection Set-
tings
Tray Priority
Tray 1 ö Tray 2 ö Tray 3 ö Tray 4 ö LCT
LCT is displayed when the optional LCT is installed.
Auto Tray Switch ON/OFF Restrict
No Matching Paper in Tray
Setting
Stop Printing (Tray Fixed)
Print Lists • Tray 1
•1-Sided
Auto Color Level Adjust. Standard (3)
Low Power Mode Settings 15 min.
Sleep Mode Settings 30 min.
Print/Fax Output Settings Print: Page Print
Fax: Batch Print
Output Tray Settings • Copy: Tray 2
• Print: Tray 2
• Print Reports: Tray 1
• Fax: Tray 1
If no finisher is installed, this menu item will not be displayed.
AE Level Adjustment Standard (2)
Auto Paper Select for Small
Original
Prohibit Copy
Blank Page Print Settings Do Not Print
Page Number Print Posi-
tion
Left & Right Bind: All the Same
Top & Bottom Bind: All the Same
Select Keyboard Local Keyboard
Settings
To Next Page