bizhub C652/C552 11-15
11.1 Using authentication unit (IC card type)
11
10 Click [Export to the device].
% Select the user name and click the [Edit] to change the registered data.
11 Click the [Write].
% Data Administrator provides the batch copy function that batch-configures the registered user data
in multiple machines with the authentication unit enabled.
The registered user data is configured in this machine.
12 Click the [OK].
13 Disconnect the authentication unit from the USB port of the computer.
14 Turn the main power of this machine off, connect the authentication unit to this machine, and turn the
main power of this machine on.
To Next Page
Loading...
