bizhub C652/C552 5-18
5.3 Quality/Density
5
Original Type Dot Matrix Original Select this setting to copy originals containing only
text that appears faint (such as that written with a
pencil). The copied text is reproduced so that it is
darker, making it easier to read.
Copied Paper Select this setting to copy images (originals) print-
ed using this machine.
Density Adjust copy density.
Background Removal Adjust the density of the background area for originals with colored back-
ground (newsprints, recycle paper, etc.) or originals on thin paper showing
text or images from the back.
Select [Auto] for "Background Removal Level" to enable automatic back-
ground density adjustment for copying with the optimal background density.
For "Background Removal", normally [Bleed Removal] is selected. However,
when copying an original with colored background, select [Paper Discolor-
ation Adj] to make adjustment for background removal for copying.
Text Enhancement Adjust the text reproduction level for an original with a photo overlapping the
text (background text) to clarify the text on the background.
To emphasize the text on the background, press [Daker Text] to adjust the
setting toward +.
To emphasize the background image, press [Lighter Text] to adjust the set-
ting toward -.
[Text Enhancement] can be configured when an item other than [Photo] is
selected.
Glossy Makes copies with a glossy finish.
Settings
To Next Page