Kyocera Taskalfa Pro 15000c - Character Entry Method; Entry Screens

4-8
Basic Operation > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
Entry Screens
Lower-case Letter Entry Screen
NOTE
Keyboard Layout
"QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Select the
[System Menu/Counter] key, [Device Settings], [Keyboard] and then [Keyboard Layout] to choose the desired
layout. "QWERTY" layout is used here as an example. You may use another layout following the same steps.
No. Display/Key Description
1 Keyboard Select the character to enter.
2 Input box Enter characters in the selected box.
3 Tab key Select to move to the next input box.
4 Shift key Select to switch between upper case and lower case.
5 [?123] / [ABC] Select the characters that are entered.
6 Space key Select to insert a space.
7 Cursor key Select to move the cursor on the display.
8 Close key Select to close the entry screen.
9 Enter key Select to finalize entry and return to the screen before the
entry.
10 Backspace key Select to delete a character to the left of the cursor.
11 Input / Limit display Displays maximum number of characters and the number of
characters entered.
2
3
4
5
6
7
8
9
10
111