5-19
Using Paper Catalog > Operation When Fiery Controller is Installed
Adjusting Color Drift
To feed paper, the speeds of the resistance motors before and after the feeding unit and the speed of the drying belt
motor must made to match, using the speed of the main unit feeding belt as a reference. Adjust this setting if there is
color drift in only the leading edge or trailing edge of the paper.
1
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette Settings"
[Cassette 1 (to 8) Settings] > [Paper Catalog]
2
Select the paper brand > [ ] (information icon) > "Adjustment
Items" [Print Chart/Help] > "Print Chart" [Print]
A test chart is printed.
Chart Example
The feeding speed of paper registered in the Master Paper Catalog cannot be adjusted.
To Next Page
Loading...
