4-15
Basic Operation > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
• Choosing from the Address Book
• Choosing from the External Address Book
For details on the External Address Book, refer to the following:
• Choosing from One Touch key
Choosing from the Address Book
For more information about how to register destinations in the Address Book, refer to the following:
Registering Destinations in the Address Book (page 3-35)
1
In the basic screen for sending, select [ ] (Address Book
icon).
2
Select the destinations.
Select the checkbox to select the desired destination from the list. The selected destinations
are indicated by a checkmark in the check box. To use an address book on the LDAP server,
select [Selection] > [Ext Address Book].
You can change the order in which the destinations are listed by selecting [Name] or [No.].
Choosing from the Address Book (page 4-15)
Command Center RX User Guide
Choosing from the One Touch Key (page 4-17)
You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen (page 15-9)
For details on the External Address Book, refer to the following:
Command Center RX User Guide
To deselect, select the checkbox again and remove the checkmark.
To Next Page
Loading...
