11-13
Scanning > WSD Scan
For Windows 10
1
Click [Start] button on the Windows and then select [Windows
System], [Control Panel], and [View devices and printers].
2
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the
installation is completed.
Executing WSD scan
1
[Home] key > [Send]
2
Place the originals.
3
Display the screen.
In the basic screen for sending, select [+] > [WSD Scan]
4
Scan the originals.
Procedure using this machine
1 [From Operation Panel] > [Next]
2 Select the destination computer > [OK]
Select [Reload] to reload the computer list.
You can view information on the selected computer by selecting [ ] (information icon).
3 Set the type of original, file format, etc., as desired.
4 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Handling Destination (page 4-15)
To Next Page
Loading...
