7-37
Paper Handling > Loading Paper
Loading Paper in the Optional Multipurpose Tray
For details of the supported paper sizes, refer to the following:
Precautions of Special Paper (page 7-12)
For the paper type setting, refer to the following:
Paper Feed Settings (page 15-19)
Be sure to use the multipurpose tray when you print on any special paper.
Media types and amounts that can be loaded in the 550-sheet multipurpose tray are as follows.
• Plain paper: 550 sheets (Paper thickness 0.1 mm conversion)
• Banner paper (when the banner tray (option) is installed): 1 sheet (length 701 to 1,220 mm), 500 sheets (length 470.1
to 700 mm)
• Thick paper, Index tab divider: A number of sheets that does not exceed the limit mark.
If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of the
paper you are using.
• When you load custom size paper, enter the paper size by referring to the following:
Paper Feeding (page 15-12)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
MP Tray Settings (page 15-16)
• Paper size can be automatically detected and selected, refer to the following:
Paper Selection (page 13-4)
MP Tray Settings (page 15-16)
To Next Page
Loading...
