Kyocera Taskalfa Pro 15000c - Printing from PC; Printing on Standard Sized Paper

9-4
Printing from PC > Printing from PC
Printing from PC
This section provides the printing method using the KX DRIVER.
Printing on Standard Sized Paper
If you loaded a paper size that is included in the print sizes of the machine, select the paper size in the [Basic] tab of the
print settings screen of the printer driver.
1
Display the screen.
Click [File] and select [Print] in the application.
NOTE
• To print the document from applications, install the printer driver on your computer from the supplied DVD
(Product Library).
• In some environments, the current settings are displayed at the bottom of the printer driver.
• When printing the cardstock, load the cardstock in the multipurpose tray before performing the following procedure.
Loading Cardstock in the Cassette 1 and 2 (page 7-19)
Loading Cardstock in the Paper Feeder (Cassette 5 to 8) (page 7-33)
Loading Cardstock in the Multipurpose Tray (page 7-27)
Loading Cardstock in the Multipurpose Tray (page 7-41)
NOTE
• Specify the paper size and media type to print from the operation panel.
Paper Feeding (page 15-12)
• To print on paper that has been registered in a paper entry, associate the paper with the paper source.
Associating from Command Center RX (page 5-3)