6-18
Using Custom Paper > Setting from Command Center RX
Setting from Command Center RX
You can set a paper that is not registered in Paper Catalog from Command Center RX.
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the machine's home screen > [More (Detail)] > [Identification/
Wired Network]
3 Log in with administrator privileges.
The user name and password for the factory default user with administrator privileges are
as follows (these are case sensitive).
Login User Name: Admin
Login Password: Admin
4 From the [Device Settings] menu, click [Paper/Feed/Output].
To Next Page
Loading...
