Kyocera Taskalfa Pro 15000c - Moving Documents in Custom Box; Copying Documents in Custom Box into Other Boxes

12-16
Box Function > Using Document Boxes
Moving Documents in Custom Box
1
Display the screen.
[Home] key > [Custom Box] > Select the box
2
Move the documents.
1 Select the document in the list that you want to move by selecting the checkbox.
The document is marked with a checkmark.
2 [Others] > [Move/Copy] > [Move to Custom Box] > select the destination of move >
[Move] > [Move]
The selected document is moved.
Copying Documents in Custom Box into Other Boxes
1
Display the screen.
[Home] key > [Custom Box] > Select the box
Color/Image Quality
Configure the settings
for density, quality of
copies, and color
balance.
Density Adjust density. page 13-11
Original Image Select original image type for best results. page 13-11
Resolution Select fineness of scanning resolution. page 13-54
Color Selection Select the color mode setting. page 13-12
Sharpness Adjusts the sharpness of image outlines. page 13-15
Background
Density Adj.
Removes dark background from originals, such
as newspapers.
page 13-16
Prevent Bleed-thru Hides background colors and image bleed-
through when scanning thin original.
page 13-17
Contrast You can adjust the contrast between light and
dark areas of the image.
page 13-15
NOTE
If a custom box is protected by a password, enter the correct password.
NOTE
To deselect, select the checkbox again and remove the checkmark.
NOTE
If the box to which the document is to be moved is protected by a password, enter the
correct password.
NOTE
If a custom box is protected by a password, enter the correct password.
Global Navigation Function Description
Reference
page