15-24
Setting up from System Menu > Device Settings
Ink Settings
[System Menu/Counter] key > [Device Settings] > [Ink Settings]
Item Description
Low Ink Alert Set the amount of remaining ink to notify the administrator when to order an ink when
the ink is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
If [On] is selected, set the amount of remaining ink to alert. The setting range is 5 to
100% (in 1% increments).
Ink Waste Full Alert Notify the administrator when the waste ink box is almost full.
Value: Off, On
To Next Page
Loading...
