12-27
Box Function > Operating using USB Drive
Check the USB Drive Information
1
In the USB Drive screen, select [USB Info].
2
Once you confirm the information, select [Close].
Removing USB Drive
1
Display the screen.
[Home] key > [USB Drive]
2
Select [Remove USB].
Select [OK], and remove the USB drive after "USB Drive can be safely removed." is displayed.
Functions
Configure the settings
for color selection and
document name when
storing the document
in the USB drive.
File Format Specify the image file format. Image quality level
can also be adjusted.
page 13-49
Job Finish Notice Sends E-mail notice when a job is complete. It is
also available that send a notice when a job is
interrupted.
page 13-45
File Separation Creates several files by dividing scanned original
data page by specified number of pages, and
sends the files.
page 13-53
Text Stamp You can add a text stamp on the documents. page 13-37
Bates Stamp You can add a bates stamp on the documents. page 13-41
Contrast You can adjust the contrast between light and
dark areas of the image.
page 13-15
Skip Blank Page When there are blank pages in a scanned
document, this function skips the blank pages
and stores only pages that are not blank.
page 13-47
Long Original Reads long-sized original documents using a
document processor.
page 13-55
Be sure to follow the proper procedure to avoid damaging the data or USB drive.
USB drive can also be removed after checking the status of the device.
Device Status (page 14-13)
Global Navigation Function Description
Reference
page
To Next Page
Loading...
