Kyocera Taskalfa Pro 15000c - Manual Staple; Remote Services; Network Settings; Host Name

15-46
Setting up from System Menu > Network Settings
Manual Staple
[System Menu/Counter] key > [Function Settings] > [Manual Staple]
Remote Services
[System Menu/Counter] key > [Function Settings] > [Remote Services]
When the trouble occurs on this product, it is possible to explain the operational procedure and the troubleshooting
method through the Internet from our sales office by accessing the operation panel screen of this product while
operating the screen.
Network Settings
Configures network settings.
Host Name
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Host Name]
NOTE
Only displayed when the optional 4,000-Sheet Finisher is installed.
Item Description
Manual Staple Select whether to use Manual Staple.
Value: Off, On
NOTE
If you selected [On], set the time until manual stapling mode is automatically cancelled. The
setting range is 5 to 60 seconds (in 5-second increments).
Staple Position Set the default Staple Position.
Value: A4, Letter
NOTE
When using the remote service settings, it is necessary to make a contract with our company. Please contact our
sales office or our authorized dealer (purchase source) for the details.
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 3-49)