13-7
Using Various Functions > About Functions
Staple/Punch
Staple
Staples the finished documents. The staple position can be selected.
Original Orientation and Staple Position
Org./Paper
/Finishing
Functions Functions
This function requires the optional Document Finisher. For details on paper sizes and numbers of sheets that can be
stapled, refer to the following:
4,000-sheet Finisher (DF-9100) (page 20-13)
Item Value Description
Staple Off
Top Left Select the staple position. For details on original
orientation and staple position, refer to the following:
Original Orientation and Punch Hole Position (page
13-9)
Top Right
2 staples Left
2 staples Top
2 staples Right
Original
Orientation
Top Edge on Top, Top Edge on Left,
Auto
Select the orientation of the original document top edge
to scan correct direction. Select [Original Orientation]
to choose orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then select [OK].
Original orientation Paper orientation Top Edge on Left
Paper orientation
Cassette paper load
direction
Cassette paper load
direction
USB
Memory
To Next Page
Loading...
