13-20
Using Various Functions > About Functions
Printing/Sending/Storing
Combine
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
Item Description
100% Reproduces the original size.
Auto Reduces or enlarges original to sending/storing size.
• To reduce or enlarge the image, select the paper size, sending size, or storing size.
Paper Selection (page 13-4)
Sending Size (page 13-48)
• Some combinations of original size and paper size or sending size may cause the image to be positioned at the
edge of the paper. To center the original vertically and horizontally on the page, use the Centering function.
Margin/Centering, Margin, Centering (page 13-22)
Layout/Edit Functions
Item Value Description
Off
2 in 1 Layout 2 in 1 (Left to Right/Top to
Bottom,
2 in 1 (Right to Left/Bottom
to Top)
Select the page layout of scanned originals.
Border Line None, Solid Line, Dotted
Line, Positioning Mark
Select the boundary line type.
Select [Border Line] to select the page boundary line, and
select [OK].
Original
Orientation
Top Edge on Top, Top
Edge on Left
Select the orientation of the original document top edge to
scan correct direction.
Select [Original Orientation] to choose orientation of the
originals, either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Custom
Box
None Dotted LineSolid Line Positioning Mark
To Next Page
Loading...
