Kyocera Taskalfa Pro 15000c - Sound; Original;Scan Settings

15-10
Setting up from System Menu > Device Settings
Sound
[System Menu/Counter] key > [Device Settings] > [Sound]
Original/Scan Settings
[System Menu/Counter] key > [Device Settings] > [Original/Scan Settings]
Item Description
Buzzer Set options for buzzer sound during the machine operations.
Volume Set the buzzer volume level.
Value: 0 (Mute), 1 (Minimum), 2, 3 (Medium), 4, 5 (Maximum)
NOTE
Select [0 (Mute)] to mute the buzzer sound of Status Indicator Light.
Key Confirmation Emit a sound when the operation panel and touch panel keys are selected.
Value: Off, On
Job Finish Emit a sound when a print job is normally completed.
Value: Off, On
Ready Emit a sound when the warm-up is completed.
Value: Off, On
Warning Emit a sound when errors occur.
Value: Off, On
Optional Keyboard Emit a sound to confirm key presses with a sound.
Value: Off, On
Item Description
Auto Detect Original Size Select whether to automatically detect originals of special or non-standard size.
System of Units Select [Metric] when automatically detecting the originals in centimeter sizes. Select
[Inch] when detecting the originals in inch sizes.
Value: Metric, Inch
Legal/OficioII/
216x340 mm
Set the original sizes for the device to detect automatically.
Value: Legal, OficioII, 216×340 mm
NOTE
This appears when [Inch] is selected in [Length Units].
A6/Hagaki/Folio/
11"x15"
You can select A6 or Hagaki.
Set whether or not Folio and 11" x 15" are detected.
Value: A6/Hagaki, Folio, 11" x 15"
NOTE
This appears when [Metric] is selected in [Length Units].