Kyocera Taskalfa Pro 15000c - Loading Paper; Loading Paper in the Cassette 1 and 2

7-15
Paper Handling > Loading Paper
Loading Paper
Loading Paper in the Cassette 1 and 2
Load the paper in Cassette 1 and Cassette 2. The procedures here represent the Cassette 1.
1
Pull the cassette completely out of the machine.
2
Adjust the paper length guide to the paper size required.
IMPORTANT
When printing on paper of a size different from the wasted paper, load the paper in cassette 2 and specify
cassette 2 as the paper source.
About Wasted Paper (page 4-13)
Cassette 1 (to 8) Settings (page 15-13)
NOTE
Do not pull out more than one cassette at a time.