Kyocera Taskalfa Pro 15000c - Setting the Action to be Taken When a Count Limit Is Reached

16-16
Job Accounting > Setting the Action to be Taken When a Count Limit is Reached
Setting the Action to be Taken When a
Count Limit is Reached
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting]
2 "Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
2
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only].
Item Description
Immediately Job stops when the counter reaches its limit.
The next job will be prohibited in sending or in storing in the box.
Subsequently Printing/scanning of the job continues but the subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are both set as 15000.