5-13
Using Paper Catalog > Operation When Fiery Controller is Installed
3
Measure the correction value for paper skewing.
1 Place the chart face printed as "FR" face up.
2 Valley fold the chart along the horizontal line at the top of the chart.
3 Find the skewing correction value from the difference between the LA1 and LA2 scales.
In the example below, LA1 can be read as "0" and LA2 can be read as "+2" from the chart,
so the difference between LA2 and LA1 (LA2 - LA1) is a correction value of 2.
4
Enter the skewing correction value.
1 [System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette
Settings" [Cassette 1 (to 8) Settings] > [Paper Catalog]
2 Select the paper brand > [ ] (information icon) > "Adjustment Items" [Paper Loop
Amount Adjustment]
3 Use [+] and [-] to specify the correction value found in step 3-3.
4 [OK] > [Close]
To Next Page
Loading...
