5-17
Using Paper Catalog > Operation When Fiery Controller is Installed
4 Align the right and left edges of the chart and valley fold it.
5 Unfold the chart and read the value of the crease in the scale "CT2".
5
Enter the correction value.
1 [System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette
Settings" [Cassette 1 (to 8) Settings] > [Paper Catalog]
2 Select the paper brand > [ ] (information icon) > "Adjustment Items" [Front Side]
3 In [Paper Timing], use [+] and [-] to specify the correction value found in step 3-3.
You can also select the entry box and enter the correction value with the numeric keys.
4 In [Centering], use [+] and [-] to specify the correction value found in step 3-5.
You can also select the entry box and enter the correction value with the numeric keys.
5 [OK] > [Close]
6 [System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette
Settings" [Cassette 1 (to 8) Settings] > [Paper Catalog]
7 Select the paper brand > [ ] (information icon) > "Adjustment Items" [Back Side]
To Next Page
Loading...
