9-15
Printing from PC > Printing from PC
Using the Banner Tray (Option for 550-sheet Multipurpose Tray)
When the banner tray (option) is used, up to 550 sheets of banner paper can be fed continuously.
The operation procedure for setting the banner paper by using the printer driver is the same as that of using the
multipurpose tray.
Using the Multipurpose Tray (page 9-9)
1
Open the paper width guides on the multi purpose tray to the
maximum width.
The print confirmation screen can be set in System Menu to not appear when the banner tray is attached. This will
allow continuous printing on multiple sheets. Refer to the follows:
Message Banner Print (page 15-42)
The paper length supported in banner tray is 700 mm to 1,260 mm (27.56" to 49.6").
To Next Page
Loading...
