11-7
Scanning > Sending Document to Desired Shared Folder on a Computer (Scan to PC)
After you enter the login user name and login password name of the destination PC, the
shared folders appear. Select the folder that you want to specify and select [OK]. The
address of the selected shared folder is set.
Select the folder from the Search Results list.
• To directly specify the SMB folder, select [Folder Path Entry] and enter each item.
Character Entry Method (page 4-8)
The table below lists the items to be set.
5
Check the status.
1 Check the information.
Change the delay as required.
Item Description
Host Name Computer name
You can also specify the port number. Enter the following format
separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:445)
If the port number is not specified, the default port number is 445.
Port Port number
If the port number is not specified, the default port number is 445.
Folder Path Share name
For example:
scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
Login User Name • If the computer name and domain name are the same:
User Name
For example: james.smith
• If the computer name and domain name are different:
Domain name\User name
For example: abcdnet\james.smith
Login Password Windows logon password
(Case sensitive.)
To Next Page
Loading...
