15-8
Setting up from System Menu > Device Settings
Weekly Timer Settings Configure settings for entering sleep mode and waking it automatically at a specified
time for each day of the week.
Weekly Timer Select whether to use Weekly Timer.
Value: Off, On
Schedule Specify the time for each day of the week at which the machine enters sleep mode.
Retry Set the number of retries for entering sleep mode.
Value: Limited Retries, Unlimited Retries
• If [Limited Retries] is selected, set the number of retry. The setting range is 0 to
10. Retry is not performed when "0" is set.
• If [Unlimited Retries] is selected, retry is performed until the machine enters
sleep mode.
• To make retry attempts, enter the retry interval with [-] [+] or the numeric keys. You
can set an interval from 10 to 60 seconds in increments of 10 seconds.
Power Off Timer (models
for Europe)
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours,
1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Power Off Rule (models for
Europe)
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
•Network
• USB Cable
• USB HOST
• Extended Function
Value: Off, On
Even when [Network] or [USB Cable] is set to [Off], if the machine does not
communicate with the other devices, the machine will enter Power Off Mode.
Energy Saver Recovery
Level
Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately.
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling the use of desired functions
only.
If you want to use all functions immediately, select the [Energy Saver] key to execute
recovery.
Power Saving Recovery: This mode enables the use of desired functions only. This
mode saves energy most effectively.
Ping Timeout Set the time until timeout occurs when [Ping] is executed in "Network Settings".
Value: 1 to 30 seconds (in 1 second increments)
Item Description
To Next Page
Loading...
