Kyocera Taskalfa Pro 15000c - Page 399

15-20
Setting up from System Menu > Device Settings
Special Paper Action When printing on Prepunched, Preprint, Letterhead, and Inkjet Matte Paper, punch-holes
might not be aligned or the print direction might be upside-down depending on how originals
are set and the combination of copying functions. In such a case, select [Adjust Print
Direction] to adjust the print direction. When paper orientation is not important, select
[Speed Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: copying on Letterhead
Value: Adjust Print Direction, Speed Priority
Inkjet Matte Paper
Action
Select the action when using Inkjet Matte Paper.
Value:
Standard: Transfers the Matter Paper in normal speed.
High Print Coverage Mode: Transfers the Matter Paper in a half speed.
NOTE
To print a document with a high coverage rate, select [High Coverage Mode].
Reference for Center
Positioning
Select the setting to adjust the center position.
Value:
Both Sides of Paper: Defines the both sides of paper as a center position.
Back of Main Unit: Defines the back of main unit as a center position.
Front of Main Unit: Defines the front of main unit as a center position.
Spool Print Data Select the priority of the spool mode.
Value:
On: Print the data without spooling.
Off: Spools the print data.
Item Description
Multipurpose TrayCassetteFinishedPaperOriginal
Multipurpose TrayCassetteFinishedPaperOriginal