Kyocera Taskalfa Pro 15000c - Page 416

15-37
Setting up from System Menu > Function Settings
Send/Store
[System Menu/Counter] key > [Function Settings] > [Function Defaults] > [Send/Store]
Item Description
Original Orientation
(Send/Store)
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left, Auto
Color Selection
(Send/Store)
Select the default color mode for scanning documents.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale, Black
& White
Color Type Set the color type when you send color documents.
Value: RGB (Profile: SP_C5000d.icm), sRGB
Scan Resolution Select the default scanning resolution.
Value: 600 × 600dpi, 400 × 400dpi Ultrafine, 300 × 300dpi, 200 × 400dpi Superfine,
200 × 200dpi Fine, 200 × 100dpi Normal
Orig. Image (Send/
Store)
Set the default original document type for sending/storing.
Value: Text+Photo, Photo, Text, Text (Fine Line), Text (for OCR)
Background Density
Adj. (Send/Store)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
Continuous Scan
(Send/Store)
Select the default Continuous Scan (Send/Store) setting.
Value: Off, On
Prevent Bleed-
through (Send/Store)
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Skip Blank Page
(Send/Store)
Select the default Skip Blank Page settings.
Value: Off, On
File Format Set the default type of the files.
Value: PDF, TIFF, JPEG, XPS, OpenXPS, High Comp. PDF, Word, Excel, PowerPoint
Image Quality (File
Format)
Select the default PDF/TIFF/JPEG/XPS/OpenXPS/Word/Excel/PowerPoint file quality.
Value: 1 Low Quality (High Comp) to 5 High Quality (Low Comp)
High Comp. PDF
Image
Select the default quality setting for high compressed PDF files.
Value: Compression Ratio Priority, Standard, Quality Priority
HighCompressionPD
F Mode
Select the compression method for sending High-Compression PDF.
Value: Text Priority, File Size Priority
Color TIFF
Compression
Select the compression method for sending the color documents in the TIFF format.
Value: TIFF V6, TTN2
PDF/A Select the default PDF/A setting.
Value: Off, PDF/A-1a, PDF/A-1b, PDF/A-2a, PDF/A-2b, PDF/A-2u
OCR Text
Recognition Act.
Configure settings for OCR Text Recognition Action.
Value: Speed Priority, Quality Priority