15-61
Setting up from System Menu > Security Settings
Sending Jobs
[System Menu/Counter] key > [Security Settings] > "System Stamp" [Sending Jobs]
Configure stamp settings for sending documents.
After configuring the setting, return to the Sending Functions or Custom Box (Sending Documents) screen from System
Menu, and select the [Reset] key.
Item Description
Text Stamp Text Stamp Select whether to print a text stamp on all sending jobs.
Value: Off, On
When [On] is selected, the Text Stamp settings cannot be changed
when sending.
Edit Text Select a text string to be stamped from templates, or enter a
maximum of 32 characters for the text string.
Templates that have been set will appear. For details on registering
templates, refer to the following:
Text (Text Stamp) (page 15-35)
Position Position Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center,
Middle Right, Bottom Left, Bottom Middle, Bottom Right
Specify the detailed stamp position using numeric values, and to set
the stamp angle.
Nudge Set the nudge.
Value:
Top/Bottom: -10 to 10 mm (in 1 mm increments)
Left/Right: -10 to 10 mm (in 1 mm increments)
Rotation Set how many degrees you want to rotate the stamp from the left or
right. You can enter the angle from 0 to 359 degrees.
Font Set the font of the text stamp.
Value:
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font Size (Text Stamp) (page 15-35)
Character Border: Off, Circle, Rectangle, Underline
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Clipping, Overwrite
Density: 10 to 100% (in 10% increments)
To Next Page
Loading...
