19-9
Troubleshooting > Troubleshooting When Printing or Copying Image
Printed images are
totally too light.
Have you checked your
operation environment?
Check your operation
environment, and adjust the
room temperature.
Step 1 Check the
operation
environment.
Have you checked the condition
and settings of paper or
originals?
Check the condition and
settings of paper or originals.
Step 2 Check the
condition and
setting of paper or
originals.
Have you checked the status of
ink container?
Take appropriate actions
according to the status of ink
container.
Step 3 Check the
status of ink
container.
Have you performed head
cleaning or nozzle recovery?
Perform head cleaning or nozzle
cleaning according the image
quality.
Step 5 Perform
print head
cleaning.
Is EcoPrint turned on? In the System Menu, change the
[EcoPrint] setting to [Off].
page 15-35
Are you using paper with poor
color expression?
Change to recommended paper
type, do a sample print, and
check the image.
Inkjet matte paper gives the best
color expression, followed by
inkjet paper and then plain
paper.
―
Image is not clear. Have you checked the condition
and settings of paper or
originals?
Check the condition and
settings of paper or originals.
Step 2 Check the
condition and
setting of paper or
originals.
Have you checked the status of
ink container?
Take appropriate actions
according to the status of ink
container.
Step 3 Check the
status of ink
container.
Have you performed head
cleaning or nozzle recovery?
Perform head cleaning or nozzle
cleaning according the image
quality.
Step 5 Perform
print head
cleaning.
Are you using paper that is
prone to ink bleeding?
Change to recommended paper
type, do a sample print, and
check the image.
―
― Select [Color/Image Quality] of
the copy function, and set
[Sharpness] to [-1] to [-3].
page 13-15
Symptom Checkpoints Corrective Actions Reference Page
To Next Page
Loading...
