19-44
Troubleshooting > Other Trouble
C
Box limit exceeded.
*1
Is [End] displayed on the
screen?
The specified box is full, and no
further storage is available. Job
is canceled. Select [End]. Try to
perform the job again after
printing or deleting data from the
box.
—
— Repeat Copy box is full, and no
further repeat copy is available.
Select [Continue] to print
scanned pages. Select [Cancel]
to cancel the job.
—
Broadcast error. — An error has occurred during
broadcast transmission. The job
is canceled. Select [End].
—
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 15-23)
Message Checkpoints Corrective Actions
Reference
Page
Cannot Banner Print. ― System stamp is set up.
Banner print cannot be carried
out.
Job is canceled. Select [End].
―
Cannot connect to
Authentication
Server.
*1
— Set machine time to match the
server’s time.
page 3-8
— Check the domain name. —
— Check the host name. —
— Check the connection status
with the server.
—
Cannot connect to
Server.
— Check the connection status
with the server.
—
Cannot duplex print
on this paper.
*1
Did you select a paper size/type
that cannot be duplex printed?
If the selected paper is not
changed and [Continue] is
selected, duplex is released.
Select the available paper.
Select [Continue] to print.
—
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
