Robot control box
Chapter 3 - page 28
M-HE.002.1003
This display indicates if the liquid level of the milk receiver jar is lower than 5
kg (11 lb.).
Testmenu > Cleaning
Warm water valve "open" or "closed".
Cold water valve "open" or "closed".
Valve of the cleaning tank to the jetters "open" or "closed".
Blow the water line to the rinsing jetters empty (only on robots with pre-
milking device).
NOTE
• Before use carefully read and understand the manufacturer's
instruction on the container label.
Spray water across the cleaning rollers.
Cleaning rolls turning.
Milk quantity > 5 kg
(5 kg=1180) no
open
Valve warm-
water
closed
open
Valve cold-
water
closed
open
Valve rinse
milk cups
closed
open
Blow dry
Milk cup
closed
Blow dry open
Valve water
rollers:
closed
yes
Operate
cleaning rolls
no
To Next Page
Loading...
