Chapter 3 - page 29
Operator’s manual ASTRONAUT
M-HE.002.1003
Valve between cleaning tank and Astri-L buffer tank "on" or "off".
Valve of rinsing line to the top of the milk jar "open" or "closed".
Blow the milk delivery line to the tank empty.
NOTE
• Do not mix different cleaning agents.
• Carefully read the manufacturer's instructions.
Peristaltic pump for dosing of Astri
®
-lin cleaning agent "on" or "off".
This screen also indicates how long the pump has been in operation at the
point of switching off. Use this option for calibration of the Astri
®
-lin (a lye-
based product).
Peristaltic pump for dosing of Astri
®
-cid cleaning agent "on" or "off". This
screen also indicates how long the pump has been in operation at the point
of switching off. Use this option for calibration of the Astri
®
-cid (an acidic
product).
Peristaltic pump for dosing of Astri
®
-L brush cleaning agent "on" or "off".
This screen also indicates how long the pump has been in operation at the
point of switching off. Use this option for calibration of the Astri
®
-L.
• Heating element does not withstand dry-boiling.
Heating element for main cleaning "on" or "off". For the heater to switch on,
the cleaning tank should be filled at least up to low level.
on
Valve buffer
off
open
Valve rinse
milk jar:
closed
on
Blow dry
milk line
off
on
Peristaltic pump
(Astri-lin)
off
on
Peristaltic pump
(Astri-cid)
off
on
Peristaltic pump
(Astri-L)
off
on
Heater
off
To Next Page
Loading...
Need help?
General
