Chapter 3 - page 37
Operator’s manual ASTRONAUT
M-HE.002.1003
In this screen you can adjust the room the cow should be guided to after a
failed milking, if the condition for "Summer Failed" has been met in the X-
pert programme.
In this screen you can adjust the room the cow should be guided to after a
failed milking, if the condition for "Winter Failed" has been met in the X-pert
programme.
If the condition "Summer+grazing no separate after 3* cow failed"
(depending on the setting) is met, this option can be used to select a new
room for the cow.
If the condition "Summer no separate after 3* cow failed" is met, this option
can be used to select a new room for the cow.
If the condition "Winter no separate after 3* cow failed" is met, this option
can be used to select a new room for the cow.
In this screen you can adjust the room the cow should be guided to after a
successful milking, if the conditions for "Summer+grazing successful"
have been met.
In this screen you can adjust the room the cow should be guided to after a
successful milking, if the condition for "Summer successful" has been met.
Summer
Failed
2
Winter
Failed
2
Summer+grazing
no separate after
3* cow failed
VCPC>2209 0
Summer
no separate after
3* cow failed
VCPC>2209 0
Winter
no separate after
3* cow failed
VCPC>2209 0
Summer+grazing
successful
1
Summer
successful
1
To Next Page
Loading...
