Step 3. Remove the EDSFF cage from the chassis.
Figure 49. EDSFF cage removal
a.
Press down the extended tab on the other side of the front chassis.
b.
Slide the EDSFF cage out of the front chassis.
After you finish
1. Install a new EDSFF cage. See
“Install an EDSFF cage” on page 100.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install an EDSFF cage
Use this information to install an EDSFF cage.
About this task
Attention:
• Read
“Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
100
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
