Lenovo ThinkSystem SR630 V3 - Install the Server to the Rack

Rack Front
Figure 24. Removing the server from the rack.
a. Press the release tabs to disengage the rails from the server.
b.
Carefully lift up the front end of the server slightly to detach the nailheads from the slots on
the rails.
c.
With three people, lift up the serve to remove it from the rails completely. Place the server
on a flat and sturdy surface.
After you finish
Carefully lay the server on a flat, static-protective surface.
Install the server to the rack
Follow instructions in this section to install the server to the rack.
S036
18 - 32 kg (39 - 70 lb) 32 - 55 kg (70 - 121 lb)
CAUTION:
Use safe practices when lifting.
R006
CAUTION:
72 ThinkSystem SR630 V3 User Guide