Figure 222. A Gen 4 16i CFF RAID adapter (four port connectors)
1 Power
2 RAID flash power module connector
3 C0
4 C2
5 C3
6 MB input connector
7 C1
Re-timer adapter connectors
See this section to locate the connectors on the re-timer adapters.
An SFF re-timer adapter
See this section to locate the connectors on an SFF re-timer adapter.
1 C0
2 C1
Figure 223. A Gen 4/5 SFF re-timer adapter
Processor-board connectors for cable routing
The following illustrations show the internal connectors on the processor board that are used for internal
cable routing.
Chapter 6. Internal cable routing 257