Procedure
Step 1. Remove the top cover. See
“Remove the top cover” on page 243.
Step 2. Remove any components that may impede access to the internal CFF RAID adapter.
Step 3. Disconnect all cables from the internal CFF RAID adapter.
Step 4. Lift the release pin, slightly slide the internal CFF RAID adapter as shown, and carefully lift it out of
the chassis.
Figure 86. internal CFF RAID adapter removal
a. Release the push pin on the internal CFF RAID adapter.
b.
Move the adapter to the right and then lift it out of the chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the internal CFF RAID adapter
Use this information to install the internal CFF RAID adapter.
About this task
Attention:
• Read
“Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
134
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
