Table 26. Parts list (continued)
Index Description
Tier 1 CRU Tier 2 CRU
FRU
Consuma-
ble and
Structural
part
51
Liquid detection sensor module holder
√
52
Heat sink PEEK nut
√
53
Standard heat sink
√
54
Performance heat sink (T-shape)
√
55
Processor
√
56
M.2 drive
√
57
M.2 PCIe x4 backplane
√
58
M.2 retainer clip
√
59
CMOS battery
√
60
Processor board
√
61
System I/O board
√
62
MicroSD card
√
63
Firmware and RoT Security Module
√
64
Rack latch (left)
√
65
Rack latch (right)
√
Power cords
Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
• For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord set consisting of a
minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length and a parallel
blade, grounding-type attachment plug rated 15 amperes, 125 volts.
44
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
