Figure 108. Power-supply-unit air baffle removal
a.
Loosen the screw on the air baffle.
b.
Lift the air baffle out of the chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a power-supply-unit air baffle
Use this information to understand how to install a power-supply-unit air baffle.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention: Read
“Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure
that you work safely.
Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with an
electrostatic-discharge wrist strap or other grounding systems.
Watch the procedure
174
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
